Planning
Tuesday, November 3, 2015
| Time |
Event |
|
|
08:00 - 09:00
|
REGISTRATION / COFFEE |
|
|
09:00 - 09:30
|
Welcome speeches |
|
|
09:30 - 11:00
|
Physics, chemistry and modification of elastomers - Ulrich Giese, J-Claude Halary |
|
| 09:30 - 10:00 |
› Application of Ion Bombardment to Rubber: Modification of chemical composition, morphology and properties. - Dariusz Bielinski, Lodz University of Technology |
|
| 10:00 - 10:20 |
› Novel block Poly(Ether-Esters) based on bio Poly(Timethylene Furanoate) as rigid segment - Iwona Pawelec, INSTITUTE OF PHYSICS, WEST POMERANIAN UNIVERSITY OF TECHNOLOGY, |
|
| 10:20 - 10:40 |
› Effect of stretching on the network structure of carbon black filled EPDM Rubbers - Nicolas Candau, Centre de Mise en Forme des Matériaux |
|
| 10:40 - 11:00 |
› Effect of degree of curing on the healing behavior of Natural Rubber - marianella hernández, Delft University of Technology [[Delft] |
|
|
11:00 - 11:30
|
Coffee break |
|
|
11:30 - 12:30
|
Physics, chemistry and modification of elastomers - Ulrich Giese, J-Claude Halary |
|
| 11:30 - 11:50 |
› Effect of crosslink density and curatives on the glass transition temperature of elastomers - Katarzyna Bandzierz, Lodz University of Technology |
|
| 11:50 - 12:10 |
› Physical vs Chemical Crosslinks in Epoxidized Natural Rubber - Sophie Norvez, Laboratoire Matière Molle et Chimie |
|
| 12:10 - 12:30 |
› Toughening elastomers with sacrificial bonds |
|
|
12:30 - 14:00
|
Lunch |
|
|
14:00 - 15:20
|
Testing of raw materials and rubber products - N. Ranganathan, J. Dick |
|
| 14:00 - 14:30 |
› Effects of Variation in Strain Measurements with the Extended Dynamic Range (EDR) of the RPA on the Accuracy of Shear Thinning Measurements for Rubber Compounds - John Dick, Alpha Technlogies |
|
| 14:30 - 14:50 |
› Capabilities of MCC-IMS for analysis of rubber - Dominik Pietrzak, Institute of Polymer and Dye Technology, Lodz University of Technology |
|
| 14:50 - 15:20 |
› Influence of Material Tests on the Pressure Prediction in Elastomer Molds - Timo Gebauer, SIGMA Engineering GmbH |
|
|
15:20 - 16:30
|
Coffee break - Posters |
|
|
16:30 - 17:40
|
Raw materials used in rubber technology - Noel Billon, Denis Rodrigue |
|
| 16:30 - 17:00 |
› Volatile components in rubber processing and from rubber materials – Analyses and 0rigin - Ulrich Giese, Deutsches Institut für Kautschuktechnologie e. V. - Daniela Witt, Deutsches Institut für Kautschuktechnologie e. V. - Inga Homeier, Deutsches Institut für Kautschuktechnologie e. V. |
|
| 17:00 - 17:20 |
› Application of Halloysite Nano-fillers in Rubber Industry - Rafał Anyszka, Institute of Polymer and Dye Technology, Lodz University of Technology |
|
| 17:20 - 17:40 |
› Modification of fillers in low temperature plasma - Dariusz Bielinski, Lodz University of Technology |
|
|
18:00 - 19:00
|
MEETING OF ELASTOMERY EDITORIAL BOARD |
|
Wednesday, November 4, 2015
| Time |
Event |
|
|
08:00 - 09:00
|
Coffee break |
|
|
09:00 - 09:10
|
Announcements |
|
|
09:10 - 10:40
|
Elastomer composites and their properties - Jacques Lacoste, Jack Noordermeer |
|
| 09:10 - 09:40 |
› Relationship between the chemical structure of silane coupling agents and dynamic performance of SBR/Silica tire tread compounds - Jacques Noordermeer, University of Twente [Twente] |
|
| 09:40 - 10:00 |
› Improvement of the properties of rubber compounds with silica, CNT and Silica/CNT hybrid as fillers - Anuj Jain, Deustches Institute für Kautschuktechnologie e.V. |
|
| 10:00 - 10:20 |
› The effect of enzymatic keratyn hydrolizate on the properties of a cellulosic-elastomeric material - Yves-Hervé Tshela Ntumba, Technical University of Lodz |
|
| 10:20 - 10:40 |
› Ceramizable elastomer composites based on HNBR/EVM blends - Mateusz Imiela, Faculty of Chemistry, Institute of Polymer & Dye Technology, Lodz University of Technology |
|
|
10:40 - 11:10
|
Coffee break - Posters |
|
|
11:10 - 12:30
|
Elastomer composites and their properties - Jacques Lacoste, Jack Noordermeer |
|
| 11:10 - 11:30 |
› Effects of conductive network constructions on the piezo-resistive performance of elastomer based composites - Hang Zhao, Ecole Centrale Paris |
|
| 11:30 - 12:10 |
› Effect of aromatic oil on phase dynamics of s-SBR/BR blends for passenger car tire treads - Akansha Rathi, H&R Group, University of Twente [Twente] |
|
| 12:10 - 12:30 |
› Influence of POSS nanoparticles on the morphology, phase separation and physical properties of PTT-block-PTMO based nanocomposites prepared by in situ polymerization - Sandra Paszkiewicz, West Pomeranian University of Technology - Izabela Irska, West Pomeranian University of Technology |
|
|
12:30 - 14:00
|
Lunch |
|
|
14:00 - 15:30
|
Modelling aspects - Stéphane Meo, Andre Hamerski |
|
| 14:00 - 14:30 |
› Constitutive modelling of the dynamical properties of a filled rubber and simulation of laminated devices with a specific FEM tool. - Stéphane Meo, Laboratoire de Mécanique et de Rhéologie |
|
| 14:30 - 14:50 |
› Modelling strain-induced crystallization of natural rubber under uniaxial loading - A. GROS, Institut de Recherche en Génie Civil et Mécanique |
|
| 14:50 - 15:10 |
› The safety platform with elastomeric damping layers for underground mining. - Karol Nicinski - C. Debek, A. Wasilewicz |
|
| 15:10 - 15:30 |
› Improving Modeling Accuracy for Design and Development of Elastomeric Products - Edwin De Vries (MSC Software) |
|
|
15:30 - 16:50
|
Coffee break - Posters |
|
|
16:20 - 16:50
|
Meeting of the International Scientific Committee |
|
|
16:50 - 18:20
|
Fatigue of Rubber - Florian Lacroix, Dariusz Bielinski |
|
| 16:50 - 17:20 |
› The univeraslity of the energy based approach to fatigue - Mohan Ranganathan, Laboratoire de Mécanique et de Rhéologie |
|
| 17:20 - 17:40 |
› Influence of a resting time on the fatigue behavior of the polychloroprene rubber - Christophe Cruanes, Laboratoire de mécanique et de rhéologie - Florian Lacroix, Laboratoire de Mécanique et de Rhéologie |
|
| 17:40 - 18:00 |
› Carbon black fillers influence on thermal ageing and fatigue damages in HNBR rubber composites - Severine Boucaud Gauchet, Laboratoire de mécanique et rhéologie |
|
| 18:00 - 18:20 |
› Dissipation mechanisms during crack propagation of a filled natural rubber - Quentin Demassieux (ESPCI) |
|
|
19:00 - 21:30
|
Closing Gala - Music by Trio Ranganathan - Best Poster award |
|
Thursday, November 5, 2015
| Time |
Event |
|
|
08:00 - 09:00
|
Coffee break |
|
|
09:00 - 09:10
|
Announcements |
|
|
09:10 - 10:30
|
Industrial Session – Product Life Cycle Management - Jean François Queslel, Glen Denstaedt |
|
| 09:10 - 09:40 |
› Rubber : Birth And Dead (Or Rebirth) - Claude Janin, Elastopole |
|
| 09:40 - 10:10 |
› Mechanical reinforcement of elastomers: effect of silica particles - Caroline Fayolle, SOLVAY |
|
| 10:10 - 10:30 |
› Life Cycle Assessment: A tool for helping ingredient manufacturers identifying priority levers for environmental impact reduction over the life cycle of their products. - JEAN-FRANCOIS VIOT, SOLVAY Research & Innovation |
|
|
10:30 - 11:00
|
Coffee break |
|
|
11:00 - 12:20
|
Industrial Session – Product Life Cycle Management - Jean François Queslel, Glen Denstaedt |
|
| 11:00 - 11:30 |
› Improved DeMattia Crack Growth Performance in Sidewall Compounds Incorporating Micronized Rubber Powder - Glenn Denstaedt, Lehigh Technologies |
|
| 11:30 - 11:50 |
› "Environmental ageing of elastomers - the duality chains scissions and crosslinking reactions" - Jacques Lacoste, Centre National d'Evaluation de Photoprotection-France |
|
| 12:00 - 12:20 |
› Nanoindentation Study of Cord-Rubber composites - Chloé Valantin, LMR |
|
|
12:20 - 13:50
|
Lunch |
|
|
13:50 - 15:00
|
Recycling and valorization of rubber waste - Claude Janin, Carol Nicinski |
|
| 13:50 - 14:20 |
› Recent Developments in Thermo-Mechanical Regeneration of Waste Rubber - Denis Rodrigue, Université Laval [Québec] |
|
| 14:20 - 14:40 |
› Application of Plasma in Rubber Technology: Properties of Vulcanizates filled by Plasma-modified Ground Tire Rubber - Tomasz Gozdek, Lodz University of Technology |
|
| 14:40 - 15:00 |
› Screening of Devulcanization aids for Truck Tire Rubber - Vignesh Kumar Rajendran, University of Twente |
|
|
15:00 - 15:30
|
Conference Closure (Vote of Thanks ) |
|
|
