|
Tuesday, November 3, 2015
| Time | Event | |
| 08:00 - 09:00 | REGISTRATION / COFFEE | |
| 09:00 - 09:30 | Welcome speeches | |
| 09:30 - 11:00 | Physics, chemistry and modification of elastomers - Ulrich Giese, J-Claude Halary | |
| 09:30 - 10:00 | › Application of Ion Bombardment to Rubber: Modification of chemical composition, morphology and properties. - Dariusz Bielinski, Lodz University of Technology | |
| 10:00 - 10:20 | › Novel block Poly(Ether-Esters) based on bio Poly(Timethylene Furanoate) as rigid segment - Iwona Pawelec, INSTITUTE OF PHYSICS, WEST POMERANIAN UNIVERSITY OF TECHNOLOGY, | |
| 10:20 - 10:40 | › Effect of stretching on the network structure of carbon black filled EPDM Rubbers - Nicolas Candau, Centre de Mise en Forme des Matériaux | |
| 10:40 - 11:00 | › Effect of degree of curing on the healing behavior of Natural Rubber - marianella hernández, Delft University of Technology [[Delft] | |
| 11:00 - 11:30 | Coffee break | |
| 11:30 - 12:30 | Physics, chemistry and modification of elastomers - Ulrich Giese, J-Claude Halary | |
| 11:30 - 11:50 | › Effect of crosslink density and curatives on the glass transition temperature of elastomers - Katarzyna Bandzierz, Lodz University of Technology | |
| 11:50 - 12:10 | › Physical vs Chemical Crosslinks in Epoxidized Natural Rubber - Sophie Norvez, Laboratoire Matière Molle et Chimie | |
| 12:10 - 12:30 | › Toughening elastomers with sacrificial bonds | |
| 12:30 - 14:00 | Lunch | |
| 14:00 - 15:20 | Testing of raw materials and rubber products - N. Ranganathan, J. Dick | |
| 14:00 - 14:30 | › Effects of Variation in Strain Measurements with the Extended Dynamic Range (EDR) of the RPA on the Accuracy of Shear Thinning Measurements for Rubber Compounds - John Dick, Alpha Technlogies | |
| 14:30 - 14:50 | › Capabilities of MCC-IMS for analysis of rubber - Dominik Pietrzak, Institute of Polymer and Dye Technology, Lodz University of Technology | |
| 14:50 - 15:20 | › Influence of Material Tests on the Pressure Prediction in Elastomer Molds - Timo Gebauer, SIGMA Engineering GmbH | |
| 15:20 - 16:30 | Coffee break - Posters | |
| 16:30 - 17:40 | Raw materials used in rubber technology - Noel Billon, Denis Rodrigue | |
| 16:30 - 17:00 | › Volatile components in rubber processing and from rubber materials – Analyses and 0rigin - Ulrich Giese, Deutsches Institut für Kautschuktechnologie e. V. - Daniela Witt, Deutsches Institut für Kautschuktechnologie e. V. - Inga Homeier, Deutsches Institut für Kautschuktechnologie e. V. | |
| 17:00 - 17:20 | › Application of Halloysite Nano-fillers in Rubber Industry - Rafał Anyszka, Institute of Polymer and Dye Technology, Lodz University of Technology | |
| 17:20 - 17:40 | › Modification of fillers in low temperature plasma - Dariusz Bielinski, Lodz University of Technology | |
| 18:00 - 19:00 | MEETING OF ELASTOMERY EDITORIAL BOARD |
Wednesday, November 4, 2015
| Time | Event | |
| 08:00 - 09:00 | Coffee break | |
| 09:00 - 09:10 | Announcements | |
| 09:10 - 10:40 | Elastomer composites and their properties - Jacques Lacoste, Jack Noordermeer | |
| 09:10 - 09:40 | › Relationship between the chemical structure of silane coupling agents and dynamic performance of SBR/Silica tire tread compounds - Jacques Noordermeer, University of Twente [Twente] | |
| 09:40 - 10:00 | › Improvement of the properties of rubber compounds with silica, CNT and Silica/CNT hybrid as fillers - Anuj Jain, Deustches Institute für Kautschuktechnologie e.V. | |
| 10:00 - 10:20 | › The effect of enzymatic keratyn hydrolizate on the properties of a cellulosic-elastomeric material - Yves-Hervé Tshela Ntumba, Technical University of Lodz | |
| 10:20 - 10:40 | › Ceramizable elastomer composites based on HNBR/EVM blends - Mateusz Imiela, Faculty of Chemistry, Institute of Polymer & Dye Technology, Lodz University of Technology | |
| 10:40 - 11:10 | Coffee break - Posters | |
| 11:10 - 12:30 | Elastomer composites and their properties - Jacques Lacoste, Jack Noordermeer | |
| 11:10 - 11:30 | › Effects of conductive network constructions on the piezo-resistive performance of elastomer based composites - Hang Zhao, Ecole Centrale Paris | |
| 11:30 - 12:10 | › Effect of aromatic oil on phase dynamics of s-SBR/BR blends for passenger car tire treads - Akansha Rathi, H&R Group, University of Twente [Twente] | |
| 12:10 - 12:30 | › Influence of POSS nanoparticles on the morphology, phase separation and physical properties of PTT-block-PTMO based nanocomposites prepared by in situ polymerization - Sandra Paszkiewicz, West Pomeranian University of Technology - Izabela Irska, West Pomeranian University of Technology | |
| 12:30 - 14:00 | Lunch | |
| 14:00 - 15:30 | Modelling aspects - Stéphane Meo, Andre Hamerski | |
| 14:00 - 14:30 | › Constitutive modelling of the dynamical properties of a filled rubber and simulation of laminated devices with a specific FEM tool. - Stéphane Meo, Laboratoire de Mécanique et de Rhéologie | |
| 14:30 - 14:50 | › Modelling strain-induced crystallization of natural rubber under uniaxial loading - A. GROS, Institut de Recherche en Génie Civil et Mécanique | |
| 14:50 - 15:10 | › The safety platform with elastomeric damping layers for underground mining. - Karol Nicinski - C. Debek, A. Wasilewicz | |
| 15:10 - 15:30 | › Improving Modeling Accuracy for Design and Development of Elastomeric Products - Edwin De Vries (MSC Software) | |
| 15:30 - 16:50 | Coffee break - Posters | |
| 16:20 - 16:50 | Meeting of the International Scientific Committee | |
| 16:50 - 18:20 | Fatigue of Rubber - Florian Lacroix, Dariusz Bielinski | |
| 16:50 - 17:20 | › The univeraslity of the energy based approach to fatigue - Mohan Ranganathan, Laboratoire de Mécanique et de Rhéologie | |
| 17:20 - 17:40 | › Influence of a resting time on the fatigue behavior of the polychloroprene rubber - Christophe Cruanes, Laboratoire de mécanique et de rhéologie - Florian Lacroix, Laboratoire de Mécanique et de Rhéologie | |
| 17:40 - 18:00 | › Carbon black fillers influence on thermal ageing and fatigue damages in HNBR rubber composites - Severine Boucaud Gauchet, Laboratoire de mécanique et rhéologie | |
| 18:00 - 18:20 | › Dissipation mechanisms during crack propagation of a filled natural rubber - Quentin Demassieux (ESPCI) | |
| 19:00 - 21:30 | Closing Gala - Music by Trio Ranganathan - Best Poster award |
Thursday, November 5, 2015
| Time | Event | |
| 08:00 - 09:00 | Coffee break | |
| 09:00 - 09:10 | Announcements | |
| 09:10 - 10:30 | Industrial Session – Product Life Cycle Management - Jean François Queslel, Glen Denstaedt | |
| 09:10 - 09:40 | › Rubber : Birth And Dead (Or Rebirth) - Claude Janin, Elastopole | |
| 09:40 - 10:10 | › Mechanical reinforcement of elastomers: effect of silica particles - Caroline Fayolle, SOLVAY | |
| 10:10 - 10:30 | › Life Cycle Assessment: A tool for helping ingredient manufacturers identifying priority levers for environmental impact reduction over the life cycle of their products. - JEAN-FRANCOIS VIOT, SOLVAY Research & Innovation | |
| 10:30 - 11:00 | Coffee break | |
| 11:00 - 12:20 | Industrial Session – Product Life Cycle Management - Jean François Queslel, Glen Denstaedt | |
| 11:00 - 11:30 | › Improved DeMattia Crack Growth Performance in Sidewall Compounds Incorporating Micronized Rubber Powder - Glenn Denstaedt, Lehigh Technologies | |
| 11:30 - 11:50 | › "Environmental ageing of elastomers - the duality chains scissions and crosslinking reactions" - Jacques Lacoste, Centre National d'Evaluation de Photoprotection-France | |
| 12:00 - 12:20 | › Nanoindentation Study of Cord-Rubber composites - Chloé Valantin, LMR | |
| 12:20 - 13:50 | Lunch | |
| 13:50 - 15:00 | Recycling and valorization of rubber waste - Claude Janin, Carol Nicinski | |
| 13:50 - 14:20 | › Recent Developments in Thermo-Mechanical Regeneration of Waste Rubber - Denis Rodrigue, Université Laval [Québec] | |
| 14:20 - 14:40 | › Application of Plasma in Rubber Technology: Properties of Vulcanizates filled by Plasma-modified Ground Tire Rubber - Tomasz Gozdek, Lodz University of Technology | |
| 14:40 - 15:00 | › Screening of Devulcanization aids for Truck Tire Rubber - Vignesh Kumar Rajendran, University of Twente | |
| 15:00 - 15:30 | Conference Closure (Vote of Thanks ) |
|
|