› Application of Ion Bombardment to Rubber: Modification of chemical composition, morphology and properties. - Dariusz Bielinski, Lodz University of Technology
09:30-10:00 (30min)
› Novel block Poly(Ether-Esters) based on bio Poly(Timethylene Furanoate) as rigid segment - Iwona Pawelec, INSTITUTE OF PHYSICS, WEST POMERANIAN UNIVERSITY OF TECHNOLOGY,
10:00-10:20 (20min)
› Effect of stretching on the network structure of carbon black filled EPDM Rubbers - Nicolas Candau, Centre de Mise en Forme des Matériaux
10:20-10:40 (20min)
› Effect of degree of curing on the healing behavior of Natural Rubber - marianella hernández, Delft University of Technology [[Delft]
10:40-11:00 (20min)
› Effect of crosslink density and curatives on the glass transition temperature of elastomers - Katarzyna Bandzierz, Lodz University of Technology
11:30-11:50 (20min)
› Physical vs Chemical Crosslinks in Epoxidized Natural Rubber - Sophie Norvez, Laboratoire Matière Molle et Chimie
11:50-12:10 (20min)
› Toughening elastomers with sacrificial bonds -
12:10-12:30 (20min)
› Effects of Variation in Strain Measurements with the Extended Dynamic Range (EDR) of the RPA on the Accuracy of Shear Thinning Measurements for Rubber Compounds - John Dick, Alpha Technlogies
14:00-14:30 (30min)
› Capabilities of MCC-IMS for analysis of rubber - Dominik Pietrzak, Institute of Polymer and Dye Technology, Lodz University of Technology
14:30-14:50 (20min)
› Influence of Material Tests on the Pressure Prediction in Elastomer Molds - Timo Gebauer, SIGMA Engineering GmbH
14:50-15:20 (30min)
› Volatile components in rubber processing and from rubber materials – Analyses and 0rigin - Ulrich Giese, Deutsches Institut für Kautschuktechnologie e. V. - Daniela Witt, Deutsches Institut für Kautschuktechnologie e. V. - Inga Homeier, Deutsches Institut für Kautschuktechnologie e. V.
16:30-17:00 (30min)
› Application of Halloysite Nano-fillers in Rubber Industry - Rafał Anyszka, Institute of Polymer and Dye Technology, Lodz University of Technology
17:00-17:20 (20min)
› Modification of fillers in low temperature plasma - Dariusz Bielinski, Lodz University of Technology
17:20-17:40 (20min)
› Relationship between the chemical structure of silane coupling agents and dynamic performance of SBR/Silica tire tread compounds - Jacques Noordermeer, University of Twente [Twente]
09:10-09:40 (30min)
› Improvement of the properties of rubber compounds with silica, CNT and Silica/CNT hybrid as fillers - Anuj Jain, Deustches Institute für Kautschuktechnologie e.V.
09:40-10:00 (20min)
› The effect of enzymatic keratyn hydrolizate on the properties of a cellulosic-elastomeric material - Yves-Hervé Tshela Ntumba, Technical University of Lodz
10:00-10:20 (20min)
› Ceramizable elastomer composites based on HNBR/EVM blends - Mateusz Imiela, Faculty of Chemistry, Institute of Polymer & Dye Technology, Lodz University of Technology
10:20-10:40 (20min)
› Effects of conductive network constructions on the piezo-resistive performance of elastomer based composites - Hang Zhao, Ecole Centrale Paris
11:10-11:30 (20min)
› Effect of aromatic oil on phase dynamics of s-SBR/BR blends for passenger car tire treads - Akansha Rathi, H&R Group, University of Twente [Twente]
11:30-12:10 (40min)
› Influence of POSS nanoparticles on the morphology, phase separation and physical properties of PTT-block-PTMO based nanocomposites prepared by in situ polymerization - Sandra Paszkiewicz, West Pomeranian University of Technology - Izabela Irska, West Pomeranian University of Technology
12:10-12:30 (20min)
› Constitutive modelling of the dynamical properties of a filled rubber and simulation of laminated devices with a specific FEM tool. - Stéphane Meo, Laboratoire de Mécanique et de Rhéologie
14:00-14:30 (30min)
› Modelling strain-induced crystallization of natural rubber under uniaxial loading - A. GROS, Institut de Recherche en Génie Civil et Mécanique
14:30-14:50 (20min)
› The safety platform with elastomeric damping layers for underground mining. -
14:50-15:10 (20min)
› Improving Modeling Accuracy for Design and Development of Elastomeric Products - Edwin De Vries (MSC Software)
15:10-15:30 (20min)
› The univeraslity of the energy based approach to fatigue - Mohan Ranganathan, Laboratoire de Mécanique et de Rhéologie
16:50-17:20 (30min)
› Influence of a resting time on the fatigue behavior of the polychloroprene rubber - Christophe Cruanes, Laboratoire de mécanique et de rhéologie - Florian Lacroix, Laboratoire de Mécanique et de Rhéologie
17:20-17:40 (20min)
› Carbon black fillers influence on thermal ageing and fatigue damages in HNBR rubber composites - Severine Boucaud Gauchet, Laboratoire de mécanique et rhéologie
17:40-18:00 (20min)
› Dissipation mechanisms during crack propagation of a filled natural rubber - Quentin Demassieux (ESPCI)
18:00-18:20 (20min)
Industrial Session – Product Life Cycle Management
Jean François Queslel, Glen Denstaedt
› Rubber : Birth And Dead (Or Rebirth) - Claude Janin, Elastopole
09:10-09:40 (30min)
› Mechanical reinforcement of elastomers: effect of silica particles - Caroline Fayolle, SOLVAY
09:40-10:10 (30min)
› Life Cycle Assessment: A tool for helping ingredient manufacturers identifying priority levers for environmental impact reduction over the life cycle of their products. - JEAN-FRANCOIS VIOT, SOLVAY Research & Innovation
10:10-10:30 (20min)
› "Environmental ageing of elastomers - the duality chains scissions and crosslinking reactions" - Jacques Lacoste, Centre National d'Evaluation de Photoprotection-France
11:30-11:50 (20min)
› Nanoindentation Study of Cord-Rubber composites - Chloé Valantin, LMR
12:00-12:20 (20min)
› Recent Developments in Thermo-Mechanical Regeneration of Waste Rubber - Denis Rodrigue, Université Laval [Québec]
13:50-14:20 (30min)
› Application of Plasma in Rubber Technology: Properties of Vulcanizates filled by Plasma-modified Ground Tire Rubber - Tomasz Gozdek, Lodz University of Technology
14:20-14:40 (20min)
› Screening of Devulcanization aids for Truck Tire Rubber - Vignesh Kumar Rajendran, University of Twente
14:40-15:00 (20min)
